If you want to get more out of your hardwood firewood, you can’t go wrong with a Bells Machining wood processor. The company’s four-series models can process logs as long as 30 feet and feature a Simonds 44-inch circular saw, and an Oregon bar saw. Powered by a Cat 67-hp Tier 4 diesel engine, these units can process up to three cords of hardwood per hour.
The Bells 6000C wood processor is a heavy-duty, hydraulically powered machine that can process logs up to 23-1/2 inches in diameter. It has a live-log repositioning system and an eight-way wedge to split smaller firewood chunks. It is equipped with an operator’s cab, enabling the user to operate the machine safely and efficiently.
The Bells machining wood processor 6000C can process up to eight cords per hour, and the company’s team was pleased with the performance at the Shoot-Out. According to Andrew, the wood quality is much better than that produced by other firewood processors at home. The machine takes 14 minutes and 42 seconds to complete a task. Andrew and Phil have since purchased additional upgrades to make their 6000C even better.
The Bells 6000C firewood processor has adjustable splitting heads and an automatic splitting cycle. Other features include an operator’s cab and a three-strand hydraulic live deck. It also has a splitter head with an eight-way wedge. In addition to these features, it comes with an eight-way wedge, kicker, and rollers.
The 5000C is designed to process logs up to 23 inches in diameter. It features a dual-drive live deck that straightens crooked logs. The heavy-duty “Elite” wedge is built into the box frame and is controlled by hydraulic cylinders on either side. Other features include a kick plate and live-log repositioning system. These features allow the operator to rotate the wood within the splitting chamber and remove chunks of bark and dirt.
After using firewood processors made by different manufacturers for many years, Phil decided to try a new brand. After a recent unsatisfying experience with one of the other brands, he looked up different manufacturers and eventually came across Bells Machining. Phil was interested in learning more about the company and visited the manufacturing facility in Perth, Ontario, Canada, to see first-hand what it takes to make a firewood processor. However, he did not buy a Bells Machining machine because it was considerably more expensive than the other two brands.
The Bells Machining wood processor 5000C has many features ideal for splitting wood. It has an adjustable splitter head, automatic splitting cycle, and saw blade stop. It has a three-strand hydraulic live deck, an operator’s cab, and four, six, and eight-way splitting wedges. This company has been in business for over 75 years, and its machines are built to last.
The Bells machining wood processor 5000C is ideal for large processing operations. It has a 67-horsepower Tier 4 diesel engine, which is an excellent choice for processing large logs. It can produce three cords of hardwood firewood per hour. The Bells 5000C is also easy to transport.
Bells Machining offers firewood processors in several different models. The 4000 model offers a cab for operator comfort, an automatic splitting cycle, and an adjustable splitter head. The machine also has an automatic split stop and single joystick control. The Bells Machining wood processor is also portable and has a one-year warranty.
Phil had previously owned several firewood processors from different manufacturers but had a horrible experience with one brand. He decided to look elsewhere and came across the website of Bells Machining. He also visited their manufacturing facility in Perth, Ontario, and decided to go with Bells. While Bells’ machines were significantly more expensive than the other two models, Phil had to determine whether the Bells’ model would be a good fit for his needs.
The 4000 Series is designed for midsize firewood processing. It has a 44-inch Simonds Circular Saw, a 22-inch Cut Oregon Bar Saw, and a five-inch 30-ton splitter cylinder. The machine was also designed to handle logs up to 23-1/2 inches in diameter.
The Bells 6000C wood processor features an automatic splitting cycle, a kick plate to rotate the wood inside the splitting chamber, and a fully adjustable splitter head. This machine features a cab for operator comfort. The Bells 5000C wood processor can handle large logs. It features a 54-inch Simonds circular saw and a six-inch 42-ton splitter cylinder. This model can process up to three cords of hardwood firewood per hour.
Bells have several wood processors, including the Bells machining wood processor 5000. This model is suitable for processing logs up to 30 feet in length. It features Oregon and Simonds circular saws and a standard Cat Tier 4 diesel engine. The machine can process three cords of hardwood firewood per hour.
This machine has all the necessary accessories, including a kick plate for repositioning the wood inside the splitting chamber. It is easy to operate and features an automatic splitting cycle. It is also equipped with an eight-way wedge for splitting logs up to 23-1/2 inches in diameter. For more extensive records, the Bells machining wood processor 5000C is ideal. It features an operator’s cab and can process up to three cords of hardwood per hour.
PAL Lumber uses a Bells 4000 wood processor to process firewood for large commercial customers and cottages. The machine has a splitter can that lets operators see what is happening inside the splitter chamber. It also has a tumbler to separate ash from wood. The device requires regular maintenance. Filters must be cleaned regularly, and the hydraulic oil should be changed every 1500 hours.
The Bell’s Machining 6000 firewood processor is a high-end model with several features. It has an automatic splitting cycle and a single joystick control. Other features include an eight-way wedge, kicker, and a three-strand hydraulic live deck. It is also equipped with a cab for operator comfort.
The 6000C was designed to process a cord of wood in just 14 minutes and 42 seconds. It also has dual-drive live decks that straighten crooked logs. And it’s equipped with a heavy-duty “Elite” wedge built into its box frame. It also has a double-chain variable-speed conveyor.
The 6000C wood processor can process logs up to 23-1/2 inches in diameter. It also features an eight-way wedge for smaller firewood chunks. The Bell 6000C also features a kick plate and live-log repositioning system, which allows the operator to rotate the logs in the split chamber.