Choosing the Right Cord of Wood For Your Stove Or Fireplace

What is a Cord of Wood Specs?

A cord of wood specs is a measure of volume used to describe the total amount of firewood in a stack. It is equal to 128 cubic feet (3.62 cubic meters), or a stack 4 feet high, 8 feet long, and 4 feet deep. The exact amount of wood in a cord varies depending on the diameter and length of the pieces, but it is generally considered to be the equivalent of a full cord of 128 cubic feet. The average cord of wood weighs between 2 and 3 tons, depending on the type of wood. A cord of firewood usually contains between 50 and 100 pieces of wood, depending on the size of the pieces.

Choosing the right cord of wood for your stove or fireplace is a matter of selecting the proper size, weight, and type. This article gives you the information you need to make an informed decision.


Whether you’re buying firewood or looking for a good piece of wood for a woodworking project, knowing the weight of a cord is essential. Cords of wood come in different sizes and shapes, so you’ll want to ensure you’re getting the correct type of wood for your project. The weight of a cord of wood can vary dramatically, depending on the type of wood.

Cords of wood are usually 4’x8’x16-18′ in size. They weigh anywhere from 2,000 to 6,500 pounds. They come in various shapes, including faces and half-cords. In the United States, the term “cord” is defined by statute and is not used in Canada.

In other English-speaking countries, cords of wood are equivalent to 128 cubic feet. They come in different sizes, including a half cord two feet high, four feet wide, and eight feet long.

Species of wood vary in density, and the weight of a cord of wood can vary with different types of trees. Some species, such as red oak, weigh more than others, and you’ll want to choose the suitable wood to get the best results.

Some online calculators will help you determine the weight of a cord of wood. They aren’t meant to be legal advice, but they can help you find suitable lumber. The line is also the standard unit of measure, so you should know how to stack it to get the best results.

The National Institute of Standards and Technology Handbook 130 defines a cord of wood. This document provides uniform regulations for the sale of fireplace wood.

If you need clarification on the exact weight of a cord of wood, you can always ask the seller. They may be able to provide a specific weight once they’ve stacked the wood.


Generally, the term “cord of wood” refers to firewood length. It is a standard firewood measurement used in many English-speaking countries. However, it is only sometimes legal to use the term cord.

In most English-speaking countries, the term “cord” is defined by a statute. The time is not officially represented in other countries, such as New Zealand. To use this term, you must first convert it to a standard measure.

Generally, a cord of wood has a length of 8 feet (2.4 m). The volume of a complete line is 128 cubic feet (4.4 m3). The depth of the entire cord is 48 inches (1.2 m).

The volume of a half cord of wood is 64 cubic feet. A half cord of wood length is four feet (1.2 m).

The length of a face cord of firewood is one-third of a full line of wood. A face cord of firewood has a height of four feet (1.2 m). The width of a face pile is sixteen inches (40.6 cm).

The height of a rick of wood is also four feet (1.2 m). A rick of wood is a stack that has not been dried. It is a common term used in the industry.

The size of the face pile is also a factor in its volume. The average length of a face pile is 16 inches (40.6 cm). The width of the rick of wood has yet to be discovered.

There are many other terms used in the wood industry. It is essential to make sure that you know the terms before you start buying. It would help if you also compare prices. If you find the price of a face cord of wood is too high, ask your seller for a price reduction. You can also negotiate a discount on an entire regular cable.


Whether you’re a home consumer looking to purchase a cord of wood or a retailer who needs to sell the wood, you’ll need to know the size of a timberline. A cable’s length is measured by multiplying the height by the height and the width by the width.

When comparing the size of a cord of wood with a stack of wood, the height of a stack can be measured by determining the height of the stacked pieces. If there are three stacks side by side, each pile will be four feet high.

If you’re buying wood to burn, you should get a full cord of wood, a stack four feet high by eight feet wide. But if you’re buying a run of wood, one roof of wood that measures 16 inches deep, you need a full cord.

However, you can get a half cord of wood, a stack of wood that measures four feet high by eight feet wide. This is enough wood to fill an eight-foot pickup truck.

Another way to measure a cord of firewood is to use the rick of wood. A rick of wood is an eight-foot-long rick of wood. Depending on how the pieces are stacked, it may be a loose pile of wood or a stacked pile.

When buying wood, measure the height and width of the pile. You can then use a calculator to determine how many full cords of wood you’re getting.

Cord size regulations vary from country to country. Check with your local firewood dealer to see what the rules are.

Sheldon cord vs. stove cord

Depending on your needs, you might be in the market for a cord or stack of the stuff. The size and cost of a line vary from state to state and can range from 0 to more than 0. To be sure you are getting the best price, it’s a good idea to call several suppliers and get a price quote before making your purchase.

There are three sizes of cords. The most extensive and most expensive is the entire line, followed by the medium-sized half cable, and the smallest is the face cord. To determine which is right for you, you need to know the regulations governing your particular jurisdiction. You’ll need to ask about the gimmicks above if you purchase your wood from a dealer.

A standardized measure of the wood’s worth can ensure you get suitable firewood for your home. For example, if you want to buy 12 inches of firewood, you should look for a stack of 16 feet wide by 8 feet long by 12 inches deep. It’s also a good idea to buy firewood with a face cord. This is the best way to ensure you are getting a high-quality product.

The full cord is the best bet if you’re in the market for firewood, and it can be found in most campgrounds. It’s also the best way to get the most value for your money. It’s worth asking your supplier for a price quote before making a purchase, and you can cash in on some excellent incentives. It’s a good idea to ask about delivery and ask your supplier to upload pictures of receipts to the Fetch app.

White oak vs. red oak

Whether looking for wood to use in your home or on a building project, it’s essential to know the differences between white oak and red oak. The two varieties have different properties and benefits.

White oak is a stiffer, more durable, and denser wood than red oak. It’s also a drier and less porous wood than red oak. That makes it more suitable for outdoor use. However, it isn’t as durable indoors, so that it could be better for fencing posts or fence rails.

White oak is also rot-resistant but not as rot-resistant as red oak. It also burns cleaner than red oak, so it produces less smoke.

Red oak is commonly used for firewood, but there are better choices for fence posts or fence rails. White oak might be better if you’re looking to build a deck or other project exposed to moisture.

The rot resistance of white oak is also essential. This is especially important for boatbuilding. Some wood species are treated to make them rot-resistant.

White oak is also denser, meaning that it will burn more efficiently. It’s also much easier to split than red oak. You’ll need a splitting maul to get the job done.

Red oak is more porous, so it absorbs moisture more easily. If water does get in, it will stain the wood black.

The difference between the two is less significant than you might think. Both are excellent quality woods. However, the price difference is mainly due to supply and demand. That means that white oak is usually slightly more expensive than red oak.

It would help if you also remembered that oak species could be very busy. Some of them have large knots or other blemishes. This may make it difficult to split.