Cost of Pulp Cord Wood

Many factors influence the cost of pulp cordwood. For instance, how do you calculate the cost per cord? You must know the different types and sizes of cords. In addition, you need to know the difference between a full cord and a face cord. There is also a log rule that applies.

Face cord vs. full cord

A face cord is a third of a full cord of wood. While many sellers will refer to it as such, the difference between face and full cords is mainly semantic. The National Institute of Standards and Technology has an official document that explains the difference. You can download it here (pages 115/116). Besides full cords, you can buy fractional ones such as 1/4, 1/2, or 3/4 of a cord.

The cost of a full cord of wood varies considerably. The price for a face cord is often higher than that of a complete line. Buying a full cord of wood is better for your wallet than buying a single-face cable. Whether you use whole or face cordwood is a matter of personal preference, but make sure you check the price of each before making a final purchase.

A face cord is similar to a full line but has less depth. It is usually half the length of a complete cable and only half the height. In other words, a face cord is the equivalent of one-third of a full line of wood.

A face cord consists of four-foot-long logs that are about 16 inches deep. Face cords can have the same volume as a full cord of wood. A complete line of wood is 8 feet long, 4 feet wide, and sixteen inches deep.

Cost of Pulp Cord Wood image 3

Stacking vs. unstacked

The cost of pulp cordwood can vary depending on the method you choose. For example, unstacked wood will take up more space than stacked wood. You should be able to measure the cord before buying it. However, if you buy a line of wood that is not stacked, you’ll have to take extra care to measure it correctly.

It would help if you always went through a trusted dealer with a good reputation when buying lumber. Also, make sure to check the length and height of the pile. A full cord should be about eight feet long and four feet tall. You should also know the difference between a face and a full cord.

If you buy stacked wood, you should measure each cord by the number of cubic feet it occupies. A line is roughly equivalent to 1.5 cords of wood. Most people buy their wood in large bundles, but some companies sell smaller increments.

The weight of wood is an essential factor in determining its price. When you stack wood, the cost increases with the number of pieces. A bundle of wood contains six parts, while a stack usually contains twenty to twenty-four pieces. The ranking number doubles if you buy more than one cord.

Truckloads

The price of a truckload of pulp cordwood depends on several factors. First, you should know how much a truck can carry. Typically, a straight truck can take eight to ten cords of wood. A load with mostly large logs is less expensive than a mix of small and significant records. The type of wood also determines the price. Hardwoods produce the most heat, while soft maple, white birch, basswood, balsam, and other types of wood produce less. A face cord is four to eight feet long and usually has an average diameter of 16 to 18 inches. Typically, a truckload of face cordwood can be split for $60 to $70 per cord.

Cost of Pulp Cord Wood image 2

Loggers highly prize wood from the paper industry. In Maine, there are only four pulp mills left. Verso Corp. of Jay, Maine, has cut the low-grade wood it buys by more than eight hundred thousand green tons per year. In Maine, loggers can fill the majority of Verso’s needs.

Buying a truckload of pulp cordwood requires careful planning. It would help if you measured how much wood your truck could carry. A truckload of good-quality hard species yields around 100 face cords. You can keep thirty lines for your use and pay about $2150 in taxes.

Delivery

The delivery cost of pulp cordwood depends on how much wood you need and how many cords you need. A straight truck can hold eight to ten lines. A load of large logs is usually cheaper than one stacked with smaller wood. The type of wood you burn will also determine how much heat it will produce. For instance, hardwoods have more heat than soft maple, white birch, balsam, or basswood.

In Northern New Hampshire, delivery costs for cordwood were $10 in 2012, and they increased to $15 in 2013. In the United States, 2.5 million households burned wood for heat in 2013, up from 1.7 percent in 2005. The percentage is even higher in heavily forested regions such as New England and the Pacific Northwest.

When buying firewood, consumers should make sure they’re getting the right amount for their money. An excellent way to ensure this is to familiarize yourself with the measurement units sellers use. Most states use cords as the legal unit of measurement. Some sellers use fractions or other local terms that may lead to price-gouging.

Cost of Pulp Cord Wood image 1

The delivery cost of pulp cordwood differs from location to location. Generally, a cord of mixed hardwood can range from $50 to $100. The expenses of stacking and delivering may also increase the price.

Prices

Prices of pulp cord wood vary greatly, and the size of a cord should be considered when comparing prices. A line can range anywhere from 100 inches to four feet in length. A standard cable weighs about 2.2 to 2.5 tons. In addition to the standard cord size, cords are sold in cord units, typically 100 inches in diameter.

Quarter cords typically cost between $50 and $125, depending on where you live and the type of wood. Quarter cords are priced slightly higher per cubic foot than full cords but are a good option for recreational firewood. These cords also make good backup heat sources. But a complete line is often cheaper if you need a large amount of wood at one time.

If you’re concerned about the environmental impact of burning wood, consider the costs associated with the process. While pulpwood prices vary depending on location, type, and cut, they are cheaper than other home heating fuels. Furthermore, dry wood is typically more expensive and can double or triple during winter. In addition, delivery and stacking costs can add another twenty to fifty dollars per cord.

The value of timber depends on its species, size, and quality. Lumber is typically sold as sawtimber or pulpwood. A standard cord consists of four or eight-foot-long boards. A ton is 2000 pounds of raw wood. Sawtimber and pulpwood prices are often quoted in cables. In some cases, however, the volume of a cord is referred to by the word “unit,” which is vaguer.

Cost of Pulp Cord Wood image 0
Add a comment