Getting through winter on less than a cord of wood can be tricky. There are several ways to accomplish this. Here are a few tips to get you started.
Cut extra wood
Having enough wood on hand to burn through the winter months can be a challenge. Not to mention, having the proper tools and equipment is a must. Having suitable wood in the right place at the right time can be a game changer. This can be achieved with a little bit of planning and foresight.
One way to do it is to measure the weather conditions in your neck of the woods. This will help you to plan your wood-buying strategies for the season. This also means you’ll be less likely to run out of wood in the winter. To get the most out of your supply, buy your wood when it is fresh and cheapest. You’ll also be rewarded with a much warmer home for winter.
A little research goes a long way, and you’ll be rewarded with an enjoyable winter season. You’ll also be less likely to have to replace your heating system before the season is over. Getting suitable wood in the right place at the correct time can make you happier.
Store it in a dry place
Getting through winter on less than a cord of wood depends on a few things. The size of your home, the weather, and how frequently you burn wood all affect how much wood you need. You should always store wood in a well-lit area, indoors or outside. You should also make sure that your wood is dry and well-seasoned. If you keep your wood indoors, you should bring it in a couple of days before you burn it to let it dry.
It would help if you considered buying kiln-dried wood. This will help make the wood dry faster. Kiln-dried lumber is also free of mold and pests. A metal rack is also a good idea to store your firewood on. It will keep the wood off the ground and allow airflow.
If you store your wood outside, you should elevate the stacks to prevent mold from forming on the wood. You should also make sure that the central stack is dry. Wet wood will take longer to dry. You can help the drying process by placing fans around the wood.
When buying wood, ensure that the seller gives you an accurate description of the volume of the wood. Some companies will offer bushels, which are perfect for one-time uses. You should also ask if the wood has been split. This will help you get more for your money.
Wood sellers often use their terminology. Some use the term “face cord” to refer to a stack of wood that is less than a full cord. While this term does not mean anything legally, it is commonly used.
A full cord of wood is an eight-foot-tall stack that measures four feet wide and four feet deep. It can also be called a bush cord or running cord. A quarter cord is four feet tall, six feet wide, and sixteen inches deep.
Stacking wood indoors is an art form. You can either pay someone to do it for you or stack your own. If you have a lot of wood, bring it in a few days before you burn it to let it dry.
Hand-split a stack
Putting together a stack of hand-split firewood can keep your family warm for days. The key to a successful stack is to build it properly. This means the best placement of wood for each section.
The best placement is one where the wood is stacked in two or more tiers. It should also be stacked at a reasonable height. That can make it dangerous to remove from the stack as the wood falls.
Wood dries better when stacked in single rows, but it can also be stacked multiple times. Stacking wood on the ground absorbs moisture, which could make the firewood unburnable. It is essential to stack the wood on pallets or other elevated surfaces. Stacking wood vertically also allows for airflow to help it dry.
Split firewood should be stacked with the bark side up. This is because the bark keeps moisture from soaking into the wood. The bark also helps the wood to shed water.
When placing the split logs in the stack, leaving a good amount of air space between them is essential. It would help to set the records with the cut end facing the wind. This can also create cross-stack channels.
The best way to stack the logs is to use triangular wedges. They have more surface area and are easier to stack. These wedges also dry faster.
Another way to stack wood is to build an end pillar. This time-tested stack can be made before the wood is stacked. If you cannot create an end pillar, you can use two side-by-side.
It would help if you practiced stacking your firewood for the first time. You should use the best tool for the job and be careful. You should also check that your firewood is seasoned. If it is not, it may be best to split it.
You can also get firewood from a store. This is best done before you need it for your fireplace. Then it would help if you moved it to your woodpile. It is also essential to keep your woodpile near a burning stove, fireplace, or wood-burning stove.
Get it from a dealer.
Getting it from a dealer to get through winter on less than a cord of wood can take time and effort. It can cost several hundred dollars, so it is essential to know how to get the most for your money. Several factors will influence the cost of your wood, including season, location, and species.
To get the best price:
- Compare prices from several different suppliers.
- Determine the size of wood you need and how it’s cut.
- If you’re buying wood for a fireplace, make sure the logs are cut to the length you need.
Many stores stock firewood in the fall and phase it out in the winter. Some will deliver it to you regularly. However, you may want to order extra to ensure you have enough wood.
A standard cord is eight feet long, four feet wide, and about 128 cubic feet. You can get a full cord if you order three face cords that are stacked together.
You may be surprised that some dealers are selling “face cords” as standard cords. They’re only 8 feet long and 16 inches deep, but they’re still considered a cord.
You can get other types of wood from a dealer, including tree-length wood. If you live in Maine, you can buy tree-length lumber and cut it down in your yard when it’s delivered.
Some dealers offer firewood in truckloads, but it can cost more. Ask a dealer if you need to know if a truckload is right for you. Most of the time, a whole load will be less than the price you pay for a cord. If you don’t need a full line, request a half-sack.
The price of a cord can vary from state to state, and some dealers use different terms in different areas. If you’re unsure, let’s get a price list and calculate the cord size.
If you’re shopping for firewood in Maine, try to buy wood that has been seasoned. The average price of seasoned timber in Maine is $290.