How Large of a Stand For One Cord of Wood?

What is a Cord of Wood?

How large of a stand for one cord of wood is depends on the type of wood being stored. Typically, a cord of wood requires a stand that is 4 feet wide by 4 feet deep by 8 feet tall. A cord of wood contains enough wood to fill a stack 4 feet high, 4 feet wide, and 8 feet long, and it weighs around 4,000–5,000 pounds. Generally, a cord of wood contains between 128 and 180 cubic feet of solid wood, depending on the type of wood and how tightly it is stacked.

Trying to figure out how large of a stand for one cord of wood can take a lot of work. Many factors can determine how big you should get. These factors include how much you want to display the logs and how big you want your stand to be. There are also many different types of log racks.

Full cord

Whether you’re buying or selling wood, it’s essential to know the definitions of a few standard terms. These may vary by seller and state. It would help if you were always wary of a seller trying to mislead you.

A full cord is a stack of wood with three rows of sixteen-inch long logs. It’s typically eight feet long, four feet wide, and four feet deep.

A face cord is also a stack of wood, but it’s less than a full cord. This can be as small as one stack of four-foot logs or as big as a single stack of eight-foot records.

The average full cord of wood weighs between 2,500 and 5,000 pounds. This depends on the species of wood you’re buying. The weight also varies depending on a variety of other factors. It can also be challenging to compare green cord measurements. Some states ban the sale of firewood by green cord measurements, so it’s best to check with your local laws.

The average full cord comprises three rows of sixteen-inch long logs about eight feet long. It adds up to about 128 cubic feet of firewood. It’s also called a bush cord. A full cord can cost anywhere from 0 to 0.

The term “face cord” is often used for a third of a cord. It’s usually one or two inches longer and one-third the width of a line.

The National Institute of Standards and Technology (NIST) has a document about what a “cord” is. It’s on pages 115 and 116.

You should always check the term “face cord” definition before buying or selling firewood. If you need more clarification, you can ask the seller.

Face cord

Buying firewood is not a one-size-fits-all deal. If you have a large fireplace, you may not need a full cord of wood. However, you can order a quarter cord or a face cord. These are smaller sizes of firewood and great for experimenting with kiln-dried firewood.

A full cord of firewood is a stack of wood. Usually, three rows of 16″ logs, stacked four feet high and eight feet long. You will usually receive four to eight pieces of wood in a full cord. If you purchase a full line, you can expect to pay around $270. However, it would help if you compared prices for different piece lengths to ensure you get the best value.

The most common term for piles of wood is “face cord.” This is the standard for the time and refers to a stack of firewood measuring four feet high and eight feet long. Some sellers will use the term “rick,” meaning an eight-foot pile of firewood. However, “rick” is not necessarily the same as “face cord.”

If you are purchasing firewood, ask the seller to stack the wood on a truck for you. This is the easiest way to keep the wood organized. This is also an excellent way to check the dimensions of the wood. It is also essential to ensure the wood is well-seasoned before you bring it indoors. You can also ask the seller to hit the wood together, which will help kill pests.

The average length of firewood is 16 inches (40.6 cm). It is also possible to buy shorter distances, which will cost more because of the extra time it takes to cut and handle the wood.

Stove cord

When buying wood, people often get confused by the terms “cord” and “stack.” Although these two terms may have similar definitions, the actual measurements of each are very different. It is best to ask your seller for measurements if you need more clarification.

A “cord” of wood is a pile of logs stacked parallel. The cord size is based on the pile’s length and the number of records. A standard cord will weigh between 2000 and 3000 pounds. Some wood is sold as fractional cords, such as a 1/4 cord.

The term “cord” can be confusing because it is used differently by different wood sellers. The most common time is the “face cord,” which refers to a third of a cord.

Another common term is the “stove cord,” which refers to a stack of wood used in a stove. A wood stack used in a furnace will usually be about 4 feet high, 8 feet long, and 12 inches deep.

The length of the piece of wood you are buying is another essential factor to consider. A full cord will be approximately 4 feet high, 8 feet long, and 4 feet deep.

In addition, you may also be able to purchase fractional cords. A 1/4 line of wood will weigh 64 cubic feet. In contrast, a half cord will consider 128 cubic feet.

The length and width of the stack will also have an impact on the price you pay. For example, if you are buying a pile of 16″ logs, you may be paying more for the wood than if you were buying a stack of shorter records.


Depending on your geographic location, there may be specific regulations regarding the size of a cord of wood. Before buying a line, you’ll need to check with your local building codes and rules.

Stacking a cord of wood is the most obvious way to measure it. When the wood is stacked well, you should have about 128 cubic feet of space. This may sound like a lot, but if you stack the wood in a loose pile, it will take up more space. A loose unstacked pile of wood will have up to 180 cubic feet of air space.

A more accurate description of the cord is the stacked cubic meter. This is a unit of measurement that is often introduced for firewood terminology.

The National Institute of Standards and Technology has an official document describing the cord, which you can download here. The paper explains how it works and includes the appropriate acronyms.

The cord is defined as the volume of wood that can be stacked in a 4’x4’x8′ space. You can buy cords as small as one-quarter of a cord and as large as one-half. This is one of many ways to measure a cord of wood, but it’s a good one to start with.

The firewood industry also uses various terms to describe smaller quantities. For instance, one-third of a cord is the face cord. Another term is the ricks. A quarter-face cable is a small amount of wood for occasional burning.

The best way to measure a cord of wood is by asking the seller to stack it for you on the delivery truck. This will allow you to see the actual size of a line before you sign the bill.

Log rack

Using a log rack to store firewood can help keep your wood dry and protected from the weather. It also makes it easier to manage and organize your wood. There are several models to choose from, depending on the amount of firewood you need to store.

A standard firewood rack can hold one cord of wood. This is equivalent to three rows of 16-inch logs. The size of your frame depends on your firewood and location. It will also depend on the amount of space you have available.

You can buy a firewood rack for indoor or outdoor use. The best frames are made of heavy-duty steel and feature a sturdy design. The steel construction is also weather-resistant. It is rust-resistant and features a powder-coated finish for extra durability.

The Champion Power Equipment 100541 96-inch log rack is a simple yet sturdy model that is easy to assemble. It keeps your firewood off the ground and can hold a full-face cord of firewood. It is also heavy-duty steel and features a black powder coat finish. It is ideal for storing firewood for your fireplace or fire pit. It also includes clear instructions for assembly.

The Pleasant Hearth LS938-48 Outdoor Steel Firewood Rack is another sturdy option. It is designed for indoor or outdoor use and can hold one full-face cord of firewood. It is rust-resistant and features arc-welded end sections to protect your wood from damage. It is made of 16-gauge steel and is finished in a powder-coated finish for extra durability. It also features a two-way polyester cover to protect the wood from the elements.