How Long Will a Cord of Kiln-Dried Firewood Burn?

.

What is a Cord of Wood?

How long will a cord of wood last burning 24 hours with an upside down fire is dependent on several factors including the type of wood, the size of the fire, and the air flow around the fire. A cord of wood is a measure of firewood, typically 128 cubic feet. Burning a cord of wood in a 24 hour period is possible, but not recommended because it can cause excessive smoke and can be dangerous. The best way to ensure a safe, efficient burn is to burn wood in short intervals.

When you are burning firewood, you should be aware of the fact that firewood comes in different sizes. Normally, it’s measured in cords, but outside North America, they use a different metric system called a stere, which is equal to one cubic meter.

kiln-dried firewood

The first question that may cross your mind is “how long will a cord of kild-dried firewood burn?” If you’re not sure, just read on. Kiln-dried firewood is a great alternative to seasoned wood. It’s easy to make year-round, and the moisture content is guaranteed to be low enough for optimum performance. Kiln-drying also eliminates many variables that can go wrong during the drying process.

The United States Department of Commerce defines a cord of wood as 128 cubic feet. Different types of wood have different weights, and the moisture content of the wood plays a big role in this. However, a ballpark range of 3,000-5,000 pounds is a good general guideline. Hardwoods are heavier, so the weight will be higher.

In addition to the dryness factor, the firewood should be split and cut into the correct length for your wood burner. This will increase its surface area, and make it easier to burn. Split wood also has more air space than uncut wood. Once cut, the wood should be stored in a place with natural air movement and sunlight.

Kiln-dried firewood can be stored indoors or outdoors. Regardless of where you keep it, kiln-dried firewood should be stored on a rack and in a dry place. When storing kiln-dried firewood, be sure to cover it with a tarp to prevent any deterioration or moisture build-up. The kiln-drying process also prevents bugs and mold from growing in the wood.

A cord of kiln-dried wood is roughly one hundred and twenty cubic feet in size. Depending on the species and moisture content, the cord may be as little as four feet high and six feet wide, or as much as four feet high and eight feet wide. A half-cord is approximately eighty cubic feet.

The burning time of a cord of kiln-dry firewood depends on how much wood you use. If you’re new to wood burning, you can start with a moderate amount of wood and see how long it takes.