How Many Cords of Wood Fit in a Truck?


What is Cord of Wood?

How many cord of wood fit in a truck is dependent on the size of the truck. A cord of wood is a unit of measure for firewood and is equal to 128 cubic feet of tightly stacked wood. The size of a full cord of wood is 4 feet wide, 4 feet high and 8 feet long. Depending on the size of the truck, between 2 and 4 cords of wood can fit in a truck.

Whether you’re new to owning a firewood truck or a veteran, you may have questions about how many cords of wood can fit in a car. These questions can be fundamental to ask if you plan to buy a new truck.

seasoned vs. loosely stacked firewood

Buying wood can be tricky because you must find out if it’s seasoned. The best way to ensure you’re buying suitable wood is to ask the seller to stack the wood on their delivery truck. However, this can also need clarification, so it’s essential to understand how wood is measured.

The standard dimensions for firewood are 4 feet high by 8 feet long by 4 feet wide. When you’re measuring firewood in this manner, you’ll need to add the dimensions of the rick or the run. Each of these terms has different meanings and sizes, so it’s essential to understand their differences.

A run is one roof of wood that’s 16 inches deep. This wood dimension is about the same as a face cord, which is half the size of a line. On the other hand, the risk is eight feet long and four feet high. The length and width of a rick of wood vary depending on the size of the wood.

The most common length for firewood is 16 inches. However, some woods, such as pine, will burn hotter and have a higher sap content. Harder woods, however, will burn longer and are less desirable. Softwoods, however, are cheaper and have a lower sap content.

A pickup truck’s bed size can also affect how much firewood you can fit. A 6-foot bed pickup truck can carry up to 1/3 of a cord of wood, while a full-size pickup can carry a half cord. However, a car with a 6.5-foot bed can hold a 0.3 cable, and a truck with an 8-foot bed can have a 0.5 line.

The size of a truck bed can also affect the amount of wood you can get from a seller. If you buy firewood by truckload, you may lose some of your space because of other items in the truck bed. You can also double your hauling capacity by investing in a sideboard.

thrown cord

Depending on your truck’s weight, you will have to decide how many cords of wood you want to haul. This will depend on the type of wood you buy and the condition of the wood. If the wood is seasoned, it will weigh less than dry wood. If the wood is unseasoned, it will consider more.

The standard full cord of wood is eight feet long and four feet wide. This means that the volume of the entire line is 128 cubic feet. This volume is a good indicator of how much wood your pickup truck can carry. You can fit one and a half cords of wood into a standard one-ton pickup with high racks.

Half a cord of wood is two thousand pounds. This may be too much for your pickup truck. It may even damage it. You will have to ensure you are not overloaded, or you could risk getting hurt.

If you are hauling wood, it is essential to make sure that you use the proper stacking technique. You must ensure that the wood is stacked to stay upright. You can use a crisscrossing approach to make the wood stack more stable. This technique allows more air space between the wood pieces. It may also help you dry the wood faster.

It is not uncommon for a full cord of wood to weigh between two and five tons. The amount of wood you can fit in your pickup truck depends on your truck’s size and the type of wood you buy. It is also essential to know the laws of the state where you are loading your vehicle. If you exceed the weight limit, you could face penalties.

In the United States, cords of wood are commonly used to measure the size of stacked firewood. Measuring the wood’s dimensions before you load it in your truck is a good idea. It would help if you also looked into the load tickets required for hauling lumber.


Whether hauling wood for a construction site or a home project, you might wonder how many cords of wood fit in a pickup truck. This depends on various factors, including the truck’s dimensions and weight capacity.

A standard full cord of wood is eight feet long and four feet wide. The cord’s volume is 128 cubic feet. Typically, a cable weighs between 1 and 1.5 tons. The weight of a line is determined by the type of wood used and the condition of the wood. The full legal cord of timber may weigh 5,000 pounds for hardwood and 2,500 pounds for softwood.

The number of cords you can load into a pickup truck depends on the dimensions of the car and the laws in the state you are hauling wood in. Depending on the vehicle, you may be required to get load tickets and have bed rails installed. Some trucks, such as the GMC Sierra, can carry up to 0.69 cords of wood.

Most pickup trucks will carry between 0.3 and 0.6 cords of wood. Popular pickup trucks include the Ford F-150, the Chevy Silverado, and the RAM 1500. You can also haul a half cord in a pickup truck with an eight-foot bed.

The truck’s size, weight capacity, and power determine the amount of wood you can load. The size of the truck’s bed and the area of its rear tray also play a role in the weight capacity. You should only load up to 2000 pounds in a modified truck. An overloaded truck can be unsafe, damaging, or stolen.

If you want to haul a full cord of wood, you may need a long-bed pickup truck. It would help if you also ensured that the sides of the bed were wide enough.

Stacking the wood is also essential. To get the most use from your truck’s load capacity, stack the wood as tightly as possible. If you have trouble doing this, you should hire a professional stacker.


Depending on the species and size of the wood, you may or may not be able to fit one cord of kiln-dried wood into your pickup truck. The amount of wood that can fit in a car depends on the type of wood, the size of your pickup truck, and the weight of the wood. Please verify these dimensions before unloading your vehicle.

One cord of wood weighs about 3,600 pounds. This amount is enough to fit into a full-sized pickup truck. For instance, a car like the RAM 1500 or a Ford F150 can hold 0.3 to 0.6 cords of wood. A car like the Chevy Silverado or a Ford Ranger can carry up to 0.69 lines.

One cord of kiln-dried firewood can also be bought in the prepackaged form at many state parks. This is a convenient way to purchase kiln-dried firewood.

Kiln-dried firewood is not only more consistent than seasoned wood, but it is also safer to burn. It contains less moisture, which makes it cleaner and faster to burn. This also means it does not produce smoke or odors from stale fires.

If you are a full-time firewood producer, you may need to buy a lot of kiln-dried firewood. The amount of wood you need to accept to run a full-time firewood operation will likely vary yearly. You will probably need to buy a mix of local bulk deliveries at lower prices and kiln-dried firewood in bundles.

Kiln-dried firewood can also be purchased in a variety of colors. These can include black, white, red, brown, or orange. This allows for more accessible indoor storage of your firewood. The kiln-drying process also helps protect your wood from insects and gives it a longer lifespan.

The volume of a cord of kiln-dried oak, maple, or poplar should be around 180 cubic feet. A face cord of wood is usually sixteen inches long. It may contain up to two hundred and twenty pieces of split wood.

The total weight of a full line of green wood varies from species to species. The importance of a full line of green wood can be anywhere from 5,000 pounds to 20,000 pounds.