How Many Cubic Feet Are in a Cord of Wood?

What is a Cord of Wood?

How many cubic feet in cord of wood is 8 feet long, 4 feet high and 4 feet wide? A cord of wood is a unit of measure that is equal to 8 feet long, 4 feet high, and 4 feet wide, which is 128 cubic feet. A cord of wood is typically composed of tightly stacked firewood and is the standard measure of firewood in the United States. In some areas, firewood is sold by the face cord, which is a stack of wood that is 4 feet high and 8 feet long, but not as deep as a full cord.

To figure out how many cubic feet are in a cord of wood, you need to first calculate the volume. Then, you need to stack the cordwood compactly. Each stack should be 4′ wide by 4′ high by 8′ high. This should yield approximately 128 cubic feet.


Before you purchase lumber, you should know its dimensions. Stacking a cord can be a good way to determine its volume. However, the exact size of a cord will depend on your needs. You can also calculate the size of a cord based on its length. For example, a cord of eight-foot-long wood should have an overall depth of four feet. Regardless of the exact length, however, the cord should be roughly 180 cubic feet in volume.

Whether you plan to stack wood or burn it, you need to know the exact dimensions of the piece you are burning. One cord of wood is approximately 128 cubic feet. A half-cord of wood is about half that size. The width of a cord of wood is also half its length.

Dimensions of cord of wood vary from tree to tree. A single cord of wood will contain around two hundred cubic feet. The volume of a cord will also depend on the type of wood used for burning. For example, a 12-foot-long piece of wood will contain about two cords of wood, while a four-foot-long piece will only contain a single cord.

Cords of wood can come in various sizes, ranging from face cords to full cords. Face cords, for example, are four feet high by eight feet long and 16 inches deep. Firewood pieces aren’t necessarily four feet long, and there’s no standard length for firewood pieces. Typically, firewood pieces are about 16 inches long, which is about one-third of a full cord.

When purchasing firewood, you can determine the number of cords in a stack by using a cord of wood calculator. This online tool will tell you the dimensions of a pile in feet. Once you have these dimensions, you can divide the number of cords by one hundred to get the exact amount of wood that you need.

Number of stacks

A cord of wood is a stack of wood that is 128 cubic feet in volume. This unit is defined by the National Institute of Standards and Technology in the US. Typically, a cord stack measures four feet high by eight feet long by four inches deep. While any stack of wood with a volume of 128 cubic feet would be considered a cord, the term “cord” is more likely to have originated from a cord of string.

The size of each stack of firewood is important. A stack must have three rows of 16″ logs and be four feet tall by eight feet long. Some sellers may also refer to this as a rick of wood. Basically, the number of stacks in a cord of wood can be a factor of size and the type of wood.

The width and length of a cord of wood are dependent on its density and moisture content. For example, a cord of wood with 50% moisture content is equal to approximately eight cubic feet. A cord of wood with one pound of moisture content equals about 128 cubic feet. The stack of firewood in a cord of wood is four feet high and eight feet long.

While a full cord of wood is roughly 128 cubic feet of compactly stacked wood, it is important to note that it can be quite tricky to determine exactly how many stacks are in a cord. If a cord is tightly packed, the wood pieces will be more compact and less dense. This creates more air space between the pieces. In contrast, a loose unstacked pile of wood has around 180 cubic feet of air space per stack.

The size of a cord of wood is important for determining its cost. A full cord contains about 600-800 pieces of firewood. A face cord, on the other hand, contains 200-275 pieces. However, the exact size of a rick of wood can vary greatly depending on the type of wood and the type of split method used to split the wood.


When it comes to measuring wood, the answer to the question “How many cubic feet in a cord of wood” depends on a variety of factors. First, you need to know the characteristics of the wood in question. For example, if the pieces of wood are not neatly stacked, the space in the cord will be different than if the pieces are tightly stacked. This makes it difficult to determine the exact volume of a cord of wood. As a result, you should use a variety of measurements to determine the size of the wood.

Another factor affecting the amount of solid wood in a cord of wood is the size and shape of the pieces. Depending on how the pieces are stacked, the volume of a cord of wood could vary by a few cubic feet. As a result, some wood sellers may add a little bit of extra wood to account for the variations.

A cord of wood can have as many as 660 pieces. For example, a face cord may contain two hundred and twenty pieces of split wood, while a full cord might contain 660 pieces. However, this is only a rough estimate and there are many factors that will affect the volume.

To find out how many cubic feet a cord of wood contains, use a cord of wood calculator. Enter the dimensions of your stack, both height and width, and then divide those dimensions by 128. If your stack has three rows of 16-inch-long logs, the volume will be about four square feet. This is a cord of wood that contains one hundred and eight cubic feet.


In the woodworking industry, a cord of wood is a measure of wood. This unit of measurement is used for wood storage and construction, and it is different from cubic feet. It is important to understand these terms to be able to get the best deals when shopping for wood. Fortunately, there are some online tools that will help you compare prices and choose the best cord of wood for your project.

First, calculate how many cubic feet you need. You can do this by adding the cubic measurements of each stack. This is easier than trying to write a formula on a spreadsheet. Also, make sure to stack your wood compactly, which will mean you get more wood for your money. If you stack a cord of wood four feet wide by four feet high, you will have 128 cubic feet of space.

To find out how many cubic feet are in a cord of wood, use a simple formula. A cord of wood measures four feet high, eight feet long, and four feet wide. To calculate how many cubic feet a cord contains, multiply the length of the cord by the width of the cord. This will give you a rough estimate of how much wood is in one cord.

Another tip is to bring a measuring tool to the store. This way, you can double-check your measurements. Having a measuring tool will also help you to make sure you are purchasing the right amount of wood.


The number of cubic feet per cord of wood depends on the size of the stack. A full cord of wood is approximately 128 cubic feet, while a half cord is around 64 cubic feet. In the United States, a cord is equivalent to one stack four feet wide, four feet high, and eight feet long. But regulations vary depending on the country. It is always best to check with local regulations.

The measurement of a cord of wood is easy to determine when the wood is stacked together, but it can be challenging if the wood is not stacked. It is recommended to ask the vendor to stack the pieces before unloading. Otherwise, check the measurements before you start using the wood.

The number of cubic feet per cord varies depending on the type of wood, the size of pieces, the straightness of the pieces, and whether there is bark present. A cord of wood from a 40-foot tree will contain approximately 40 cubic feet. However, if the wood is not straight or in a particular shape, it will be smaller.

A 1950 report shows the cubic feet per cord of wood in the Pacific Northwest. The authors measured the end diameters of eight-foot logs stacked in a cord and then calculated the cubic volume per piece and cord. The results varied from 102.4 cubic feet per cord for “First class split wood” to a quarter-cord of sticks or logs.

While there are different definitions for a cord of wood, the metric is generally consistent between states. If the wood is neatly stacked, the measurement of a cord of wood is the same as the size of a standard pickup truck. However, when wood is loose, a cord may be a face cord, which is one-third of a standard truck’s capacity.