Hydrolic Chainsaw For Wood Processor

If you are considering purchasing a hydrolic chainsaw for wood processing, you need to know a few things. These include their costs, benefits, types, and maintenance. In addition, you need to ensure that you have adequate space for storing the chainsaw in a safe location. These tools are highly reliable, and can be a very useful tool for your business.


Compared to a traditional chainsaw, a hydrolic chainsaw is quieter and easier to operate. It is a more versatile machine that can handle large volumes of wood. It has the ability to chop up two to three cords per hour. It is also equipped with a hydraulic log stopper. With all of these features, a hydrolic chainsaw is a great choice for firewood processors.

When choosing a hydrolic chainsaw for wood processor, it’s important to decide how you will use the machine. This will help you determine how much power you need. For example, if you plan to split large logs into smaller pieces, a 2-stage hydraulic pump is ideal. Some popular brands of hydrolic chainsaws include Milwaukee, Husqvarna, and Stanley. The chainsaw speed will be measured in feet per minute or seconds, depending on the sprocket size. The higher the sprocket size, the faster it cuts.

Another advantage of a hydrolic chainsaw is that it is easier to maintain than a traditional chainsaw. The chainbar will remain sharper longer and will last longer. It will also be quieter. The hydraulic chainsaw will not make as much noise as a traditional circular saw. In addition, a hydrolic chainsaw is more cost-effective than a circular saw.

For many customers, the largest face of a log does not meet their needs. This can be frustrating if you need to split a log into smaller pieces. Offering different lengths of cuts will reduce the number of cuts you need to make. Longer pieces will require extra splitting, which is dangerous and expensive. If you’re splitting a log larger than 12″ in diameter, you’ll end up splitting it again.

Hydrolic Chainsaw For Wood Processor image 3

A hydrolic chainsaw for wood processor will allow you to split logs without clogging up your workspace. They can also be portable and move easily with an ATV. This machine features a 10-HP engine and a two-stage hydraulic pump. This system splits a log into two or four pieces, and allows you to cut it to the length you require.

Another benefit of a hydrolic chainsaw is its ability to cut logs faster and more efficiently. When used for firewood processing, it can also reduce your cost of processing and increase resale value. A firewood processor will allow you to process a larger volume of logs more quickly, so you can get your firewood ready before the cold weather starts.


There are several different types of hydraulic chainsaws for wood processors, and it is important to consider your needs when purchasing one. The main differences between these machines are the hydraulic power source and the amount of horsepower required for splitting and sawing. Hydraulic saws are typically driven by either petrol or diesel, and have one or more hydraulic cylinders.

Most processors use a hydraulic chainsaw bar, but there are also some models with a large circular blade, called a slasher. These types of saws are fast, easy to use, and require minimal maintenance once set up. They also provide the highest cutting capacity of all the types of saws. The large capacity of these machines makes it possible to process large pieces of tree with ease.

Besides cutting large wood, these chainsaws can also be used in firewood processors. They are typically smaller in size than circular saws, but they can cut wood up to 15″ in diameter. They feature a chain bar that can move up to 90 degrees from horizontal, and back down again. This allows the chain bar to move freely within the machine, so that the machine or operator can focus on cutting wood without distraction.

Hydrolic Chainsaw For Wood Processor image 2

Some processors need to split a log after sawing. In these cases, a splitter with a “French fry” design will not be efficient, since the wood has a grain and the splitting window will not always match the grain. A splitter cylinder that is too small for the wood will break.

Whether you are looking for a chainsaw for firewood processing or a firewood processor, it is essential to select a high-quality blade. A sharp blade can prevent a lot of problems, such as cutting the log in the wrong direction or leaving it in a mess.

Some chainsaws have a high rpm, while others have low speed. High-speed chainsaws use a high RPM motor and gearing mechanism. Most chainsaws spin at 10,000 RPM, but there are some chainsaws that spin as high as 13,000 RPM.


If you own a hydraulic chainsaw for wood processing, you need to maintain it regularly to keep it running as smoothly as possible. This type of chainsaw works on low-pressure hydraulic power and usually operates on an elevated work platform. It is powered by a single hydraulic cylinder.

In addition to keeping it clean, you need to regularly replace the chain. This component is a vital part of the saw. Changing the chain is easy but is vital to maintain the performance of your saw. A dirty chain slows down the saw and results in clogging. To inspect your chain for wear, check the drive links.

Hydrolic Chainsaw For Wood Processor image 1

Firewood processors are large pieces of equipment, and maintenance can be time-consuming and expensive. Many people are not familiar with heavy equipment mechanics, so it is best to leave it to the professionals. It’s important to ask the manufacturer about their service and parts availability, lead times, and company support. The latter is especially important if you live far from the manufacturer’s headquarters. If something goes wrong with your machine, it can put your operation behind schedule and make your company’s bottom line suffer.

Generally, firewood processors have a hydraulic chainsaw bar for cutting logs. These saws require periodic maintenance and oiling. These saws run on low-pressure hydraulic power and are often operated from an elevated work platform. If you need to operate your saw from a distance, you may have to install an external machine or connect it to a generator. Proper maintenance includes removing debris, cleaning the air intake slots, and checking the emergency stop switch.


Hydrolic chainsaws are a popular choice for firewood processors. These saws are designed for faster cutting and lower noise compared to a circular saw. They are also much more affordable than a traditional circular saw. Here are some important factors to consider when evaluating the cost of a hydrolic chainsaw.

While a hydraulic chainsaw bar is the standard choice, some processors use a large circular saw blade, called a slasher blade. These saws are fast and require little maintenance once set up. In addition, their safety features have been proven over decades. For example, some processors won’t allow employees to walk within 50 feet of a slasher blade. By comparison, a traditional chainsaw bar requires oiling and frequent maintenance.

While safety is a big consideration, it shouldn’t be the only consideration. A high-quality machine should have multiple safety features. Most manufacturers list the output rate for their machines. For example, a light-duty machine should be able to split two cords of frozen Aspen in less than five minutes. You should also consider the machine’s capacity for cutting different sizes of trees.

Hydrolic Chainsaw For Wood Processor image 0

A firewood processor is a major purchase, so it’s important to carefully consider all aspects of its operation. First, consider how durable it will be. Some firewood processors are very durable, but poor-quality machines can be difficult to maintain. In addition, it is important to consider the manufacturer’s support. This is especially important if you’re located far from the manufacturer’s headquarters. It’s expensive to ship and haul a machine, so you want to make sure that the company provides excellent customer service.

Another important aspect of a chainsaw is its chain. Regular cleaning and maintenance will improve the chain’s performance. Dirty chains require more time to cut wood, and they restrict airflow, slowing down the machine. If you’re unsure of how to inspect your chainsaw chain, you can always check the drive links on the saw for wear and tear. The drive links should indicate the manufacturer and year of manufacture.

The Cord King CS20-40 firewood processor has the largest cutting diameter and split force in its class. It can process two to three cords of wood per hour. It also comes with a log lift and two-strand live deck. Proper maintenance involves cleaning the air intake slots and testing the emergency stop switch.

Add a comment