Large Blade For Wood Processor


What is a Large Blade for Wood Processor?

A large blade for wood processor is a tool used to cut and shape large pieces of wood. It consists of a large, sharp blade mounted on a motorized handle that allows for precision cutting of large pieces of lumber. The large blade is generally used for cutting through thicker pieces of wood, such as hardwoods, as well as for making large, straight cuts. It is also ideal for creating curved shapes and intricate details in wood. The blade is also useful for removing excess wood and smoothing out rough edges.

If you are looking for a large blade for your wood processor, there are many options. There are circular saws, multi-functional saws, and slasher blades. Each one has a different purpose and has its own features. You can learn more about each type of blade in this article.


A large blade for a wood processor can make splitting logs a breeze. This machine features a 1000mm metal blade, a 37 HP Briggs and Stratton engine, and an adjustable splitting length. It also features a four-way wedge system for splitting logs that vary in length.

A chainsaw-style firewood processor is also available. While it’s a smaller saw than a circular saw, a chain bar can cut 15 inches of wood in one pass. A chain bar is mounted 90 degrees on the saw’s horizontal plane and is moved up and down by the machine’s operator.

Another important feature to consider is the speed. Some processors can process as much as two cords an hour. For this, the chain saw must be equipped with a fixed-displacement hydraulic pump. The splitting pump will be either a Hi-low or a two-stage piston pump. These features reduce the power that the engine needs to operate the splitter.

In addition to the cutting speed, other factors such as the cutting force and feed speed should be considered. Large wood requires a slower sawing feed speed than small wood. The force of the saw should be controlled so that the chain doesn’t stall. There are several ways to control the chain speed, such as using a feed modulating valve.

The Cord King CS20-40 is one of the most efficient firewood processors on the market. The model has an industry-leading cut-to-cut cycle time of 3 seconds. This unit also features a fully-equipped operator’s cab, a comfortable suspension seat, and high-visibility windows.

Circular saw

A large circular saw blade can be intimidating for firewood processors. You should choose the right blade for your processor based on the type of materials you need to cut. This will improve the cutting performance and lower your operating costs. Consider buying a Stellite-tipped circular saw blade, which is made from strong materials that will last longer. This type of blade also limits sawdust loss. These blades are best suited for cutting heavy logs and hardwoods.

One of the best mid-sized processors on the market is the Posch S-375. This machine features a large circular saw blade (90cm in diameter) and an automatic high-speed valve that controls the saw’s blade speed. It also has an adjustable stroke length to maximize the splitting efficiency. You can also pre-set the length of the finished logs, allowing you to cut them to a consistent length.

In the early nineteenth century, a wood processor named Walter Taylor used circular saws to produce high-quality rigging blocks for the Royal Navy. Ultimately, the circular saw concept spread throughout the developing world. In America, stories of its early history are somewhat separate, but they are largely in agreement about how the saw was invented.

A larger circular saw blade is more efficient. Compared to smaller models, a large circular saw can process more wood in less time. For example, a cord king CS20-40 can process four to ten cords of firewood per hour and has an industry-leading saw-to-saw cycle time of 3 seconds.

Slasher blade

While most processors use a hydraulic chainsaw bar, some have begun using a large circular saw blade called a slasher blade. These blades can quickly chop down trees and require minimal maintenance once set up. The safety of this type of blade is proven by decades of experience. In fact, some people will not walk within 50 feet of one. By contrast, traditional chainsaw bars require frequent oiling and maintenance.

In order to process wood safely, it’s important to choose a slasher blade for wood processors. This blade has proven itself for decades and is ideal for chopping down wood. The blade can be adjusted from 25 to 50 cm, depending on the type of wood. The slasher blade is a safer circular saw blade that can be used on both gas and hydraulic wood processors.

A slasher saw assembly using a circular saw includes five hydraulic lines. A 141 power/pressure line actuates the saw, a 1” return line returns hydraulic fluid to the loader, and a 5/8-inch case drain line drains the hydraulic fluid from the motor.

Firewood processors are the safest and most efficient way to cut and split firewood. Although firewood processors aren’t practical for every household, they can be a great investment for homeowners and small businesses who want to process large amounts of firewood. They come in various sizes, from small, lightweight machines to large units that can be towed by a truck.

Multitek 3040XP2

The Multitek 3040XP2 large blade wood processor is the supersized version of the 2040XP2. This model is specifically designed for processing the largest logs. It has the largest log capacity of any Multitek machine and is capable of processing up to 32″ diameter logs. The machine can process approximately seven cords of wood per hour.

This processor is set up for outdoor operation and features a fully enclosed heated cab. Another worker controls the John Deere wheeled loader that supplies the Multitek processors with logs. The finished firewood is then fed into a conveyor-driven screen-cleaning system to remove fine dirt. It is then discharged into a walking-floor trailer.

Gish Logging purchased three Multitek 2040XP2 firewood processors in 2005. These machines use a hydraulic splitter to reduce the diameter of logs to the size needed for a fireplace. The Multitek 2040XP2 models have a 16-way splitter head and can process logs up to 40 feet long and 20 inches in diameter. The company has run the machines for 14 years. The current owner, Mike Gish, maintains the machines.

Bilke S3

The Bilke S3 large blade for wood processor features a rotary blade system for cutting and splitting wood sections in a matter of seconds. With a processing capacity of 30m3 per hour, this machine is a powerful and efficient choice for a variety of jobs. This machine also features a wide fast outfeed conveyor system for easy transport of processed wood to storage. Aside from its versatility, the Bilke S3 is also cost-effective and is rapidly gaining popularity.

The Bilke S3 firewood processor has a high-output capability with a rotating blade, splitting knife, and log feeders. Log feeders can be simple trestles, which require the operator to roll logs into the feed deck, or fully automated hydraulic feeders that are integrated with the processor. In addition, the Bilke S3 wood processor features a high-output conveyor and a new, redesigned blade.

This processor is controlled in the machine cab with a button or joystick control system. Splitters are adjustable from two, four, or six ways and can be adjusted easily from the machine’s cab. It is easy to maintain and has a heavy-duty, durable design.

This machine is suitable for wood processing companies, whether they are small or large. The repositionable large blade allows operators to quality process a wide variety of wood. It also helps reduce the need to pre-sort timber lengths. It also enables operators to process a more varied mix of timber, improving margins.

Peak Equipment

If you’re looking for a large blade for wood processor, you’ve come to the right place. Peak Equipment is a family-owned business in New Zealand that can help you find the perfect one for your needs. The company offers quality equipment at affordable prices, and its customer service is second to none.

The company has been selling the Palax range of wood processors to customers for over ten years. In addition, the company’s customers have shared their positive experiences with these machines. One of these customers, Henrik Kjellberg, owns two Palax Power 70 machines. He says that the machine doesn’t require any sharpening, even after processing over 1,000 cubic meters of firewood.

Another popular model is the 18 SCP, an ideal starter machine or part-time firewood producer. It produces up to a full cord of firewood per hour. The machine has a 7 1/2′ live deck and a 37-horsepower EFI Briggs and Stratton engine. It can accept logs that are 20″ diameter by 16′ or 22′ long. It has a multi-wedge system for optimal chopping and splitting.

Another model is the Cord King Compact. It has the same features as the larger models, but is cheaper and easier to use. The Cord King Compact can produce up to nine thousand full cords of firewood per year. The machine has a cycle time of two to four seconds. It’s a great piece of equipment for the growing firewood business.