The Chomper Wood Processor

The Chomper is a single-person operation that can process two to four cords of wood per hour. It is equipped with a hydraulic winch to process logs safely at ground level. It is ideal for processing large amounts of wood, and its single-person design allows the operator to stand away from the machine while processing. The device is located in St. Paul, Alberta, about 90 miles northeast of Edmonton.

4.5-second cycle time

Bob uses his Chomper wood processor to process nearly a thousand cords of wood each year. The Chomper handles logs up to 14 inches in diameter. He also uses Makita chainsaws and other woodworking tools. Bob also purchases lumber to use in his woodworking projects. This work keeps him busy during the bad weather. Bob processes the logs out in the open, which helps him save on fuel. He also has a wood stove for heating the workshop.

Bob uses his Go 4 It Enterprise business umbrella to take on many projects. He might cut grass during the summer or build custom planters. The Chomper SMPLX14D has a four-way splitter and works with a Hudson 20-foot conveyor. Bob also uses a Bobcat S175 to move the firewood away from the machine.

Chomper firewood processors can process up to a cord per hour. Its ten-horsepower engine can split large logs in just three or four seconds. This machine can split logs up to 12 feet in diameter and is portable and easy to use. It has a convenient handle for carrying the logs to a new location.

The Chomper Wood Processor image 3

Sawdust clean-out chute

The Chomper is a single-person wood processor that processes logs at ground level. It has a hydraulic winch that can process two to four cords per hour. The operator can stand above the machine and is protected from falling logs and sawdust. Bob purchased his Chomper from a supplier in Rainier, Ore., and he researched online before making the purchase. His only requirement was to find a machine with a hydraulic winch.

Bob processes close to 1,000 cords of wood per year. He does custom cutting and processes semi-truck loads. He pulls the Chomper wood processor using his Ford F15 pickup. Bob’s business is mobile, so being able to process wood in any condition was a top priority.

The Chomper can handle logs up to 14 inches in diameter. The saw blade is made of specially heat-treated steel, which cuts through wood quickly and efficiently. The saw blade travels through about 80 percent of the log, leaving about two-thirds intact. The cutting blade is mounted on a carriage that moves backward through the record to the desired length.

Cost

The Chomper wood processor is a one-person machine that can be used for various tasks. The wood processor is equipped with a hydraulic winch and can process two to four cords of wood per hour. Because it works at ground level, the operator can stand off the machine and process the wood at their own pace. The devices are available from various manufacturers and can range from two to four hundred dollars.

The Chomper Wood Processor image 2

The Chomper is excellent for processing wood that is dry or frozen. It’s a reliable, low-maintenance machine that keeps Bob’s business going. It also has an automatic cycle that shears and splits firewood. The device can process up to 14 inches in diameter.

The Chomper comes with eight grease nipples, which make it easy to grease the machine. Bob lubricates his engine daily. He explained to me the process and routine for oil changes. It is straightforward and can be used by anyone. The Chomper comes with a warranty.

Size

Chomper wood processors come in various sizes, but the largest can handle up to 14-inch diameter logs. In 2005, Rainier Hydraulics introduced the Chomper Super-14, which features shear-cutting action. This machine is the fastest model in the company’s lineup. A John Deere 60-horsepower turbo-diesel engine also powers it. The operator can control the processor’s speed using the joystick controls on the machine.

While most wood processors are made for two to four people, the Chomper allows for one-person operation. Depending on the operator, two to four cords of logs can be processed per hour. A hydraulic winch helps the operator stay clear of the machine while processing the records. Bob purchased a Chomper SMPLX14D from Rainier Hydraulics Inc., located in Rainier, Ore. He did a little research online before buying the machine.

The Chomper Wood Processor image 1

Bob processes close to 1,000 cords a year with his Chomper. He also does custom cutting and processes semi-truck loads. In addition to the Chomper, Bob uses the Go 4 It Enterprise one-half-ton Ford F15 pickup to pull the machine. Bob’s business depends on mobility, and the Chomper is highly convenient and versatile for his needs.

Design

A one-person operation is possible with the Chomper, which can process up to two cords of wood per hour. The unit includes a hydraulic winch for easy log handling. The machine can be used for multiple tasks, including clearing brush and making custom planters. It can also be operated from ground level. After researching the product online, Bob purchased his Chomper from Rainier Hydraulics Inc. in Rainier, Ore. However, one requirement needed to be more negotiable: he wanted it for use in his business.

The Chomper wood processor can process logs of almost any length and even handle dry or frozen wood. It has an automatic cycle that splits and shears logs into desired sizes. It can handle records up to fourteen inches in diameter. Each cut takes between five to 15 seconds.

Bob processes close to a thousand cords of wood per year. He also does custom cutting and processes semi-truck loads. He pulls his Chomper with a Ford F15 pickup. Mobility is a crucial benefit for his business. The Chomper’s mobility was one of the main factors he looked for in a wood processor.

The Chomper Wood Processor image 0
Add a comment