Choosing suitable trailers large enough to haul a cord of wood can take time and effort. While the most obvious choice is a dump trailer, there are some factors to consider before purchasing. You’ll also want to consider how much wood you’ll need to haul and if you wish to store the wood in a dump trailer or a single-axle utility trailer.
Cost of a cord of wood
Several factors determine the price of a cord of wood. The cost can vary according to the type of wood, the location, and the time of year.
The weight of wood can also affect the cost of a cord. For example, a line of hardwood may weigh 5,000 pounds, while a thread of softwood may weigh 2,500 pounds. The price can also vary depending on how the wood was cut. For example, high-quality cherry wood may cost as much as $900 per cord.
The cost of wood may vary by city and state. For example, a cord of oak may cost as little as $180 in some locations. Alternatively, a line of mesquite may cost $300-600 in some areas.
The cost of a cord of wood may also vary based on the type of delivery service. For example, it may be cheaper to use a local delivery service than to hire a professional. Sometimes, the delivery cost can be as low as $2 per mile. In some locations, the cost of firewood may double during the winter. This is because the supply of wood may be limited.
It is essential to choose a reputable dealer. For example, you may want to buy wood from a dealer who will not charge you delivery fees if you are within a certain radius of the dealer’s location. Also, ask about the wood’s overall volume before buying it.
A cord of firewood may be more expensive in the winter because the wood is dense. However, you may also be able to beat the market by buying during the spring and summer. Depending on the time of year, the cost of a cord of wood may be as low as $150 or as high as $500.
It is also essential to buy wood that has been seasoned. Unseasoned wood will be heavier and will release more smoke than dry wood. Moreover, seasoned wood is more durable. The cost of a cord of wood will vary depending on the type of wood and its seasoning.
Dump trailer vs. single-axle utility trailer
Whether you’re hauling wood, debris, or other materials, a dump trailer is your best option. It makes unloading and loading a large load easier and allows you to carry as much of the material as possible.
Dump trailers are available in three different types. Typically, they come in sizes from 8 feet to 30 feet long. Depending on the type of trailer you choose, you will need to consider the weight of the material you’re hauling and your towing vehicle’s weight limits.
A dual-axle trailer will allow you to haul larger loads. Most campers will have one load-bearing axle and one leaf-spring axle. Leaf-spring axles work together on uneven terrain. They can handle about 2,000 pounds of load. You will want to look for a trailer that has solid sides to help prevent racking.
Single-axle trailers are perfect for smaller loads. They may lack brakes, but they’re ideal for hauling debris. They’re also suitable for moving firewood. However, single-axle ATV trailers can carry up to 925 pounds.
Dump trailers can also have scissor lifts. The scissor lift works by spreading out the footprint of the trailer and providing maximum leverage for dumping. It also reduces the chance of box racking.
Dump trailers work well for stockpile dumps, excavation/pit mining, and hauling semi-liquids. They can be used on rough roads. You can also choose models with ramps built into the tailgate. These are especially helpful because they can be lowered and raised with a simple lever pull.
Consider a dual-piston-style hydraulic lift. This uses two pistons under the trailer to lift the box up and into the air. The charge spreads out the load and reduces the risk of racking.
You’ll also want to consider the wall heights of the trailer. The higher the wall heights, the stronger the sides will be to keep the load contained. Also, it would help if you looked for tie-down anchors on the side of the bed rather than on the floor. These anchors prevent the chains from laying over the tongue, which can chip the paint.
Stacking wood in alternating directions
Whether you are looking for a truck to haul your wood or buying wood to burn in your fireplace, you should know what cord of wood is and how it is measured. You can use a stick cord scale to calculate the number of face cords you need.
A face cord of wood is a measurement of an eight-foot length of timber and four-foot width. It is also known as a rick. The size of the rick can vary depending on who you ask, but it usually refers to the amount of space a 32-square-foot face of wood provides.
The stick cord scale is a state standard for stacked wood. It calculates the quantity of fuelwood-length timber, such as logs or poleward. It can also be used to calculate the length of semi-tree timber.
Stacking wood in alternating directions is more space efficient. It also helps keep the wood dry. This can help you fit more wood in your truck bed. If you plan on stacking in alternating directions, it is crucial that your truck can handle it. If it can’t, you might risk breaking your vehicle or causing other drivers to be injured.
It is recommended to stack wood only a little. You should only be able to stack a few feet above the ground. Cover the wood on the floor if you plan to stack it with a tarp or dolly. This will prevent moisture absorption, and moisture absorption can lead to rot.
If you want wood for your fireplace, you should choose seasoned wood. This will help you get the highest quality heat output from your fire. It will also be cheaper. You will also need to consider your location and the wood you use.
The price of a cord of wood can vary depending on the type of wood you buy and the city you live in. A complete line of wood can cost as much as $50 to $150. It can also be cheaper if you purchase it from gas stations.
Properly storing wood
Taking the time to store wood on trailers properly can save money and help you keep your camper ready for use. It is essential to properly store your trailer to prevent the wood from rotting or breaking. Also, if you plan on taking your trailer out in the winter months, be sure to have it covered. The cover will protect your trailer from wind and rain. It will also keep it clean and ready to use.
The first thing to do when storing your trailer is to clean it thoroughly. Remove any dirt or debris from the inside and outside of the trailer. You may also want to remove any floor mats. After cleaning the trailer, it is important to wax the painted areas and clean the hinges. It would help if you also brushed the electrical cables to remove rust. You may have a short or dead battery if you don’t do this.
When storing your trailer, you should also be sure to use a cover. These covers help prevent the wood from drying out and keep the trailer clean and ready to use. The body should also be able to breathe to prevent condensation from occurring. If your camper has a wood deck, you should also have it covered.
You should also ensure your trailer’s floor is not cracked or corroded. If it is, you can apply an epoxy floor to it. Alternatively, you can use a wood sealant. You should also ensure the wood is dry if you don’t use a bond. If the wood is wet, it may rot and break. If you need help treating the wood, consider consulting a professional.
If you have a wood deck, you should also be sure to keep it covered during the winter months. Snow can wreak havoc on your trailer’s deck. It can also cause scratches on the paint. It can also deteriorate if your trailer’s deck is exposed to excessive shade. If you store your trailer in the right way, you may avoid ending up with costly repairs.