Using a Full Size Truck With a Cord of Wood

What is a Full Size Truck with a Cord of Wood?

A full size truck with a cord of wood is a large truck that is capable of transporting a full cord of firewood, which is equal to 128 cubic feet of wood. It is typically used for commercial purposes, such as transporting large amounts of firewood from one location to another. The truck must have a large enough bed to accommodate the full cord of wood and must be equipped with a proper hitch to tow the load.

Whether you are a professional truck driver or haul a few cords of wood to your favorite tree farm, there are many advantages to having a full-size truck with a line of timber. For starters, you will be able to drive faster and more safely. You can also load more wood once because you can attach a trailer to the truck. You can also stack the wood in alternating directions, which will make the space in your vehicle larger.


Using a full-size pickup truck to haul a cord of wood can be a good idea. However, you must know that not all pickup trucks are built similarly. Some have greater weight tolerance and can carry more than a full cord. Some trucks have locking mechanisms to prevent the theft of the wood. It is also a good idea to check your local height restrictions to ensure that your pickup truck can safely haul the cord of wood.

Most people will purchase wood with the entire cord. However, some companies will sell it in half cords. These cords cost about more per cubic foot than the entire cord.

In many states, cords are the only legal units of measurement. However, some sellers will use their lingo and definitions to deceive you. Be careful when you purchase wood from someone unfamiliar with the terms.

The size of the pickup truck bed also plays a role in determining the cost of the cord of wood. Most trucks can carry a half cord, about 64 cubic feet. However, some trucks have a bed shorter than the standard truck bed. This means that half a cable can fit in the bed of a full-size pickup truck.

If you are looking for wood for a backup heat source, purchasing a half cord is a good idea. Half a cable can cost between $100 and $300. The price will vary depending on the type of wood and where you live. If you want wood that will last longer, you should purchase hardwoods. Softwoods will burn for about six weeks.

If you are looking for firewood, you will need to ask if the wood has been delivered. Most reputable sellers will not charge you a delivery fee within a certain radius. However, rising fuel prices can also increase the cost of providing wood.

Cords of wood are a great way to keep warm during the winter. However, they are also expensive. Before purchasing, you should know the wood’s price, quality, and density. Also, you should check with the seller to ensure that the wood you are purchasing is seasoned and ready to burn.


Choosing a pickup truck for a wood load is an important decision. The car must be able to haul a heavy load and have a long bed to accommodate the wood. The volume of the shipment depends on several factors, such as the dryness of the wood, the dryness of the truck box, the weight of the wood, and the height of the side boards.

Wood is used for various reasons, including fireplaces and wood stoves. The standard full cord of wood is four feet wide, eight feet long, and 128 cubic feet in volume. It can also be referred to as a “face cord.”

Rick is another type of wood measurement. It is eight feet long, four feet wide, and 24 inches high. It is similar to the face cord, but it is smaller. It is usually used to measure the volume of wood.

If you are still determining the size of the wood you are buying, check with the seller for the most accurate measurements. It would help if you also asked how they measure their wood. It is usually recommended to buy from a reputable dealer with a reputation for quality lumber.

If you buy a pickup truck with an eight-foot bed, you can usually fit a half cord of wood. It is only sometimes possible to provide a full line, though. You may need to get two load tickets using a small pickup truck.

Cords of wood measure the volume of the wood you buy and the amount of usable lumber. The number of cables in a stack of firewood is calculated using a line of the wood calculator. The calculator will calculate the number of threads in a wood pile based on the size and the number of rows in the stack. It will also display the percentage of full cords.

Whether buying a pickup truck or a tractor-trailer, you must ensure the wood is stacked correctly. It is essential to have the wood stacked level with the sides of the truck box. It is also recommended that you use spacing between stacks for air circulation.

Stacking wood in alternating directions helps fit more wood into a truck.

Stacking wood in alternating directions helps to optimize space in the truck bed. This is particularly beneficial when packing tall, thin wood into a small space. To do this, you’ll need to be smart about your stacking strategy. You can make this process less complicated by using a wood rack. This will allow you to stack your wood in an orderly fashion without leaving a smudge in the bed of your truck.

A wood rack can be a wise investment, especially if you have a larger-than-average truck bed. For best results, your stack should be on a flat surface of at least 6 feet by 6 feet. You can purchase a wood strap at most home improvement stores. The best part is that you won’t need to buy a ladder or a dolly to help you get the job done.

A wood rack makes stacking your wood in alternating directions a snap. If you need more time to invest in a wood rack, you can always hire a professional to do the job for you. While you’re at it, ask your wood vendor to stack your wood on the delivery truck for you. This can be a time-saver for large or awkwardly shaped pieces of wood.

There are more than a few ways to stack wood in alternating directions. For example, you can stack the wood in a pyramid shape. Another trick is to create side compartments that can store long objects. These compartments are convenient for small pickup trucks. You can even stack it in reverse to create a reverse pyramid. This is especially helpful if you’re trying to move wood around a lot. It might be hard to figure out which way to stack the wood if you’re trying to avoid a collision.

Hitching a trailer to your truck will allow you to carry more wood at once

Using a trailer is an effective way to haul more wood at once. It also increases the storage capacity of your vehicle. But towing a trailer requires proper hitching and loading. It would help if you also were safe on the road. You may risk a severe injury if you don’t take reasonable precautions.

First, you need to determine the payload capacity of your trailer. This will be listed on the VIN label of the trailer. It would help if you also considered the tongue weight. This is the trailer’s weight attached to the hitch ball. It should be between 10 and 15 percent of the trailer’s total weight. The trailer must be loaded properly to avoid swaying or sagging.

Once you know the payload capacity of your trailer, you need to ensure that your truck is rated to handle the trailer’s weight. Your truck should not exceed its maximum gross vehicle weight rating (GVWR). You can find the GVWR on the VIN label of the trailer.

If you tow a dump trailer, you will have a higher payload capacity than a utility trailer. Using a dump trailer to haul firewood is safer because it doesn’t require lifting the wood yourself. If your trailer doesn’t have an attached jack, you can use a regular car jack to lift it. If your camper has an attached jack, you must ensure it is in good shape. You need to contact a mechanic if the jack needs to be fixed.

You should also check the trailer’s air pressure. Proper air pressure will keep the axle and tires in good condition and help prevent axle damage. Similarly, you should check the trailer’s lights to ensure they are working correctly. It would help if you never drove with a trailer that is not working.

You should also check that the coupler and hitch ball is attached correctly. Usually, they are secured by a cotter pin. These will be attached below the coupler if you have a trailer with safety chains.