What Are Cord of Wood Measurements?

What is a Cord of Wood Measurement?

A cord of wood measurements is a unit of volume used to measure firewood. It is equal to 128 cubic feet (3.62 cubic meters) and is generally defined as a stack of wood 8 feet long, 4 feet high, and 4 feet deep. A full cord of wood contains about 85 cubic feet of wood, with the remaining cubic feet made up of air. It is important to note that firewood is sold by volume, not by weight, and that the amount of wood in a cord can vary depending on the size and shape of the wood.

A cord of wood can be measured in a variety of ways. It can be full, face, thrown, or stacked. You can find out each of these measurements and how they differ.

Full cord

When it comes to firewood, there are many dimensions of wood to consider. One standard measurement is the full cord of wood. A complete line of wood is a stack of logs four feet wide, eight feet long, and four feet deep. In most cases, a pile of these logs will consist of three rows, each with 16-inch records.

The standard volume of a full cord is 128 cubic feet. This volume is equivalent to a year’s supply of firewood. However, a full line of wood can cost several hundred dollars. To better understand how much you’ll be paying, it’s essential to know some basic measurements of a full cord of wood.

The face cord of wood is usually one-third the size of a complete line. It is also called a rick and is a small bundle of wood. In the United States, it is often used to measure how much wood you can load into a pickup truck.

The half cord of wood is a stack of 64 cubic feet. This volume is slightly less than the size of a complete line but smaller than the rick.

Rick is a type of firewood that is used in the kitchen. This type of wood can vary in length and depth. The rick is typically around four feet high and eight feet long.

If you are buying firewood, you should ask the seller how they measure the length of the wood. They should tell you if they use a stacked or thrown method. If they use a stacked method, you can use the cord’s dimensions to calculate the price. If they use a thrown way, you should compare the logs and find a vendor who has a good reputation.

Whether you’re a homeowner or a professional, it’s essential to understand the measurements of a full cord of wood. The correct method will ensure you get a good deal on your lumber. If unsure, you can always call a local dealer to get a quote.

Face cord

Buying a face cord of wood is a great way to save money on firewood. This is because this type of wood has one deep enough log to fit in a pickup truck’s bed. Typically, it measures 4 feet tall and 8 feet long. It is a good size for most home fireplaces and stoves.

Some providers also offer full cords of wood. A complete line is a stack of eight feet by four feet by 16 inches. It is a standard measurement for dry lumber in the United States. The weight of a full cord of kiln-dried wood is 3,600 pounds. This is enough for eight weeks of use.

Another standard way to measure wood is a rick. Rick is a wood stack four feet wide by eight feet long and has a depth of no more than four feet. The number of complete lines in the stack can vary, but the average is 85 cubic feet. It is usually used for firewood storage.

Other measurements include a quarter cord, six feet long by sixteen inches deep. These are more expensive because of the cost of cutting. Typically, the stacking method affects the size of the face cord.

The entire cord of wood is the most common measurement for stacked timber. It typically consists of three rows of sixteen-inch logs piled four feet high. The overall volume of a stack is 180 cubic feet. However, the amount of wood you need for your fireplace may be less than this.

The best way to buy a full cord is to compare prices from multiple providers. The entire line of a kiln-dried wood stack can last up to eight weeks. The weight can vary, but the cost can be determined by comparing the average length of each piece. Some sellers will price their wood by full cord, while others will give you a much smaller amount for the same price.

A face cord of wood is an aesthetically pleasing stack of wood. It is often the best option for a home fireplace.


When measuring the stack of wood, you will have to consider the dimensions of the logs. Each piece should be the same length, width, and depth. A good rule of thumb is to leave space between the details so air can circulate. A full cord is eight feet long and four feet wide. A quarter cord is six feet long and two feet wide. This type of cord is often used to experiment with kiln-dried firewood.

To determine the number of cords in a pile of firewood, you can use a calculator. The calculator will take the dimensions of the wood and find out how many lines are present. It will also tell you the number of cubic feet in the cord. You can check the numbers against an online table to know how much the line weighs.

The standard cord consists of four feet-long sticks stacked in a four-by-eight-foot rick. The total volume of the line is 3.6 cubic meters.

The pulpwood unit is a standard in the Canadian pulpwood industry. It measures the volume of dry wood when stacked. It is usually referred to as a run or face cord. The size of a run is the length of one roof of timber 16 inches deep. The same goes for the face cord.

A run of wood isn’t a full cord, but it’s essential information. This term refers to a single row of wood. When this row is crisscrossed, the ends stabilize. The crisscrossing of the wood provides more air space between the pieces. It’s also worth noting that this type of wood is less likely to burn well.

When it comes to the size of the wood, it can take time to figure out. It’s not uncommon to hear different assumptions. This is why it’s a good idea to know the size of the wood before purchasing. It’s also a good idea to inspect it before you buy it. It’s best to look for a wood dealer with a good reputation. If you need to know, you can ask to see the packing.

Thrown cord

It is essential to know the proper cord measurements for firewood. The length of your wood pieces, the size of the tree, and the amount of bark on your wood will all play a part in determining how much useable lumber you can get from the entire cord.

The standard volume for a full cord is eight feet long, four feet wide, and four feet deep. However, different countries have their standards for regulating the standard line. In the U.S., the bar is 128 cubic feet. When purchasing a green cord, you should know that its volume shrinks six to 8% when dried.

A full cord is also called a store. A stereo is a variant of a 1.4 cubic meter. It represents 0.276 cords. The average length of a store is one m3. A face cord is also known as a rick of wood. It is a stack of firewood with an approximate height of four feet. This count is rough and may vary depending on the type of wood.

The statute defines a cord in most states. In some states, it is regulated, but the standards may vary.

The full cord is a stack of wood that is stacked well. This includes the length, width, and height of your wood. For example, a full line of 12-inch lumber should be stacked at a distance of eight feet. If you are buying lumber, you should check the size of your pile before you make a purchase.

When buying thrown cords, make sure to compare the length and the height of each piece. This will help you determine the value of the line. You can also call a local dealer to find the price for each article. You can compare the price of each piece against the average cost of a full cord. You can then make a final purchase decision.

When buying loose-thrown cords, you will find that the size can vary. Some are short, and others are long. If unsure of the size, you can check with a dealer before buying.