What You Need to Know Before Buying a Cord of Wood

(I, we, me, our)

What is a Cord of Wood Weight?

A cord of wood weight is a unit of measurement of firewood in the US and Canada, equaling a volume of 128 cubic feet (3.62 m3) when stacked. A cord of wood is generally equivalent to a stack of wood 4 feet high x 4 feet wide x 8 feet long (1.2 m x 1.2 m x 2.4 m). A cord of wood is composed of 8 to 10 trees, depending on their size and species. Firewood is typically sold by the cord or fraction of a cord.

Whether you’re buying a cord of wood for a project or to create a new design, there are a few things you need to know before you buy. You’ll find the information in this article.

Cost of a cord of wood in North America

Whether you are new to the firewood scene or want to make sure you are getting a good deal, there are a few things you need to know about the cost of a cord of wood in North America. The price depends on your location, the type of wood you buy, and the time of year.

If you are in a colder climate, you may need more than one cord of firewood per winter. The average price of a line of wood in North America is around 0 to 0. This number can change depending on the state you live in and the time of year. Usually, the prices go up in the winter, while the prices drop in the spring.

The US Energy Information Administration reports that 2.5 million homes rely on firewood as their primary heating source. The number of homes using this fuel source is increasing each year.

The standard measurement for a cord of firewood is 128 cubic feet. It is also a pile of logs stacked four feet high and eight feet long. The exact measurements can vary slightly depending on the size of the wood.

A full cord of hardwood firewood is typically between $120 and $180. This is higher than the price of softwood, which is cheaper. The price is also affected by the seasonality of the tree species. The best time to buy firewood is in the early spring.

It is essential to ask questions about the wood’s volume before purchasing it. If the seller provides accurate information about the importance of the wood, you could be paying for something that is not worth the price. It would help if you were cautious of sellers who use ambiguous terms.

Cords of firewood are a great way to save money. They are easy to stack and require less labor. However, you should check the wood’s moisture before you buy it. If the moisture level is too high, you should not use it for your home’s heating.

The price of a cord of wood in North America can vary from city to city and even state to state. If you need to know the cost of a line of timber in your area, you should call several local operators to find the average price.

Full vs. half cords

Depending on your home needs, you may purchase a full cord or a half cord of firewood. A complete line is a large quantity of wood – four feet high, eight feet long, and 128 cubic feet. However, a half-cord may be better if you need a truck or SUV to carry it.

A full cord usually consists of three rows of 16-inch long logs. This allows for a total volume of wood that can fit into a standard eight-foot pickup truck. You can also buy one-third of a cord, which is 32 inches or 48 inches long. You’ll have to pay for delivery if you get a complete line. Fortunately, most reputable sellers will only charge you for delivery if you live within a certain radius.

The average length of a stack of firewood is four feet high, eight feet long, and twelve inches deep. It is essential to check the dimensions of the wood you’re buying to compare the full and half cords of wood.

You’ll want to be sure that the amount of solid wood you’re getting is worth your price. If you need to know how much a total cord costs, you can call dealers or use online tools to find out. You can also ask your prospective seller how they measure.

Another way to measure the volume of a stack of wood is by using the rick. Rick is an eight-foot-long pile of wood that can be stacked into a pickup. You can compare the rick to a full cord, though not all sellers will give you this information.

The cord of wood is a common term in the firewood industry. It is an official measurement for the volume of fireplace wood. It measures four feet high, four feet wide, and eight feet long.

The rick is a more obscure way to measure the volume of wood. It is a term used in the pulpwood industry in the United States and Canada. It is a stack of wood that measures four feet high, eight feet long, and sixteen inches deep.

Dry vs. wet wood

Whether you’re burning wood in a stove or a fire pit, you need to understand the difference between dry and wet wood. This will help you burn it more efficiently and prevent any issues from occurring. In addition, you’ll be able to determine how much time you need to wait before you use your wood.

If you burn wet wood, you’ll produce more smoke and soot. This can contribute to air pollution and damage your chimney. Using dry wood is more environmentally friendly, as well as more efficient.

Wet wood has a higher moisture content than dry wood. This means you’ll need to let it air dry before using it. This process is called seasoning.

You’ll need to allow the wood to air dry for several weeks. It will dry out faster if you live in a sunny, warm climate. But you’ll also need to consider the humidity of your area. The lower the humidity, the quicker the drying process will occur.

The most obvious way to tell if your wood is dry is to pound two pieces together. This will result in a dull but ringing sound. You should only hit the outer surface of the wood, as touching the inner surface will give you a lower reading.

If you’re burning wood for a fire pit, you’ll want to allow it to dry for six months. However, if you plan to use it in a wood-burning stove, you should leave it to dry for up to 18 months.

When preparing your wood for burning, you should cut it to a size that’s easy to manage. It would help if you also cut it to a maximum length of 40 cm. You can find wet and dry wood on the Internet. You should also check the moisture content of the wood to ensure that it’s at least 15%.

Depending on the type of wood you’re burning, you’ll have to allow it to air dry for various reasons. If you’re burning hardwood, you’ll need to enable it to dry out more than softwood. The hardwoods will also have more dense fibers, meaning they’ll take longer to dry out than softwoods.


Generally speaking, the shrinkage of a cord of wood is 6 to 8 percent when dried. This amount varies based on the age of the wood. The type of wood and the cutting method also influences it. For instance, softwoods tend to have more comprehensive grains, which makes them more prone to warping.

The volume of a cord of wood is typically between 85 and 128 cubic feet. This is a rough figure, but the book can vary based on the size of the piece and the way it is stacked. Using the proper dimensions to measure the cord of wood is essential.

When measuring a cord of wood, it is best to look at its overall dimensions, length, and several rows. This will ensure you get the correct quantity of firewood.

The moisture content of wood is usually 3-4% during the winter, and the moisture content increases to 12% during the summer. The moisture content can be measured with a moisture meter. It is also helpful to note that wood from the outer layers of trees is more likely to warp. For example, a wood door with an 8% moisture content will swell 3/32″ in the summer and gain 2/30″ in the winter.

When buying firewood, you should always consider the cost of the actual wood, including the shrinkage. A typical cord of wood is 85 cubic feet of solid wood. Air space takes up about 30 to 35 percent of this volume. It is essential to increase the dimensions of the wood to accommodate the shrinkage.

If you want to buy a cord of wood, check with your local dealer. It can be tricky to compare measurements, so it’s essential to understand the terms used. For example, Greenwood adds a volume loss to the total value of the cord. Some states prohibit the sale of firewood by green cord measurements.

Another term for the face cord is ricks. This refers to the raised edges of the wood, which tend to turn towards the center of the piece. This can occur if the bark of the wood has degraded.