Wood Processor Cutter Setup

A wood processor is a machine that splits all kinds of wood into smaller pieces. It usually has a multi-position splitting wedge. It also has a hydraulic lift that can lift logs onto a deck to be further split. Some of these machines can be attached to backhoes or big tractors, but you can also construct your own hydraulic system if you are handy with tools. Despite these machines’ various advantages, there are some things you should know before buying one.

Log splitter

A log splitter is a device that is used to split logs into smaller pieces. They can process dry wood that has been bee-sawn into smaller pieces. Because they’re mobile, they can be brought close to a log, making it much easier to split it. Some log splitters can also be used to fell trees at a customer’s site.

A good log splitter can process a full cord of firewood per hour. The Alpha 6 Splitter, for example, has a table grate and specialty box wedge to make fast work of large diameter logs. It’s also easy to use and is compatible with a TWC-12 firewood conveyor.

Log splitters are a great option for commercial firewood processors. They’re easy to operate, and they handle large logs quickly and efficiently. This kind of tool uses hydraulic force and hydraulic fluid to power the wedge, which splits the wood into small pieces. You can control the PSI and flow rate to achieve optimal performance. Most manufacturers also offer PSI recommendations that you can follow to keep your log splitter running efficiently.

Log cutter

Wood processors are used for processing wood, and there are various types of them. Some are large, while others are small and compact. Large logs require a larger wood processor than softwoods. The size and diameter of the logs also have an impact on the choice of a wood processor. The ideal wood processor is able to split logs into eight to twelve pieces.

Wood Processor Cutter Setup photo 3

Wood processors must be equipped with safety measures and instructions for use. These must be incorporated into work and adhered to by all employees. Some processors also come with a sample safety plan that can be customized to the job site. The safety plan should also include posters explaining the rights of workers under WISHA.

The main parts of the wood processor are the chainsaw and the log splitter. The chainsaw section features a long blade, and the log splitter section has a steel stop at about 22 inches. The hydraulic system then pushes the log section against a sharp steel plate, and splits it into two or more pieces.

A good wood processor should be able to split a wide variety of types of wood. It should be able to process 2-way logs as well as four and eight-way logs. It should also have a multi-position splitting wedge to split logs to different diameters. Lastly, it should have a hydraulic lift to help move the logs to the deck for further splitting. This hydraulic lift can be done by a backhoe or big tractor.

A wood processor setup should include basic power tools such as a grinder, cutting saw, drill machine, and hand tools. Some of these tools can be purchased from a hardware store or downloaded online.

Electric joystick

The DYNA SC-12 XP firewood processor is a powerful mid-range unit that is easy to set-up and operate. The machine is equipped with a high-performance 20-HP Honda engine and a powerful hydraulic saw motor. The machine’s 20-inch bar saw features a joystick to control the cutting motion. Its standard 3/8″ pitch chain helps keep costs down and ensures that it can be reused.

Wood Processor Cutter Setup photo 2

Another model, the Japa 395 firewood processor, uses a Honda iGX800 engine and a three-phase electric. This machine features a one-hand joystick for easy operation and a large oil reservoir. The machine is also equipped with wheels for easy transportation. It is an excellent choice for small producers. The machine also boasts a high-output, high-quality motor and a low-maintenance hydraulic system.

This unit is one of the best-known firewood processors available on the market. Its power is matched with its features, including powered feed rollers, a 52-inch vertical circular saw, a block twirler, and a 100-HP Kubota Diesel. It also features a heavy-duty live deck with log stops. This machine is compatible with a minimum 35-horsepower tractor and offers the same cutting and splitting capacity as the 40-SCP.

Size of machine

A wood processor is a machine used for cutting and splitting logs. It is usually mounted on a trailer, which reduces its maneuverability. This can be an issue when working in a construction site or wooded area where it must maneuver around obstacles. The following sections will discuss some of the key factors to consider before purchasing a wood processor.

First, consider the size of the logs you plan to split. A large machine may be needed for large hardwood logs, while a smaller machine may be appropriate for softwoods. Also, take into account the diameter of the logs. A good wood processor should be able to split logs up to eight to 12 pieces.

A wood processor consists of a base, operator station, and multiple splitter devices that rotate parallel to each other. This base supports the various components of the processor, including the saw blades. There is also a pusher rod that moves the cut pieces along an axis. Finally, two cradle members support the split pieces.

Wood Processor Cutter Setup photo 1

Size of wood processor cutter setup differs between manufacturers. If you intend to sell your firewood to a variety of markets, you may need a larger machine than you would use to heat your home. Alternatively, if you’re making firewood for a restaurant, you may need a smaller machine.


Whether you’re preparing firewood for a large outdoor wood boiler or splitting up softwood for your backyard garden, the right wood processor cutter can make the job easier and quicker. Different models perform different tasks, so it’s important to find the right one for the job. When purchasing a wood processor cutter, be sure to consider the size and diameter of the logs you’ll be splitting. A good wood processor should be able to process logs of up to eight inches in diameter and 12 inches long.

A wood processor cutter setup consists of a base and operator station, as well as a carriage that accepts logs. Once a log is inserted into the carriage, clamps secure the log and advance it until it comes in contact with the parallel rotating saw blades. Then, using a pusher rod, cutting pieces are pushed along an axis and positioned on cradle members.

The design of a wood processor cutter depends on a number of factors, including how much firewood you plan to process. Different markets require different processing techniques, and different types of firewood require different sizes. For example, people who use large outdoor wood boilers prefer to process large, slow-burning hardwood pieces. In contrast, restaurants that use wood-fired ovens usually use smaller pieces of firewood. Depending on the type of logs you’re planning to process, you may need a large machine.

Firewood processors are expensive to buy, but they’re worth the investment if you plan to use it regularly. You’ll need a cutting saw, a grinder, a drill machine, and hand tools to build a firewood processor. You can find many commercially-produced wood processor plans online or in a hardware store. You can also choose to purchase a gas-powered firewood processor or a PTO-driven wood processor.

Wood Processor Cutter Setup photo 0
Add a comment